How To Clean An Apple Watch Band In Easy Ways

how to clean apple watch band

Your comfort (a clean band decreases chances of skin irritation) and the long-term durability of your device depend on you regularly cleaning your Apple Watch, especially after it has been exposed to sweat, soap, sunscreen, and pretty much any other liquid that isn’t water.

How to properly clean and dry your Apple Watch band, Apple Watch, and Apple Watch Digital Crown are shown here.

How To Clean Your Apple Watch Band

If the fancy leather band on your Apple Watch is present, a light cleaning procedure is recommended. You should avoid dousing the wristband in water because Apple staff members claim that the leather used is not water-resistant. Instead, use these quick and simple instructions to thoroughly clean the band without causing any harm.

1. Your Apple Watch’s band should be removed. If you’re using a non-Apple branded third-party band, abide by the maintenance recommendations listed on the band itself.

2. When it comes to buffing the band clean without damaging the leather’s finish in any other way, a clean, non-abrasive microfiber cloth is essential. Note: Apple advises against using soap when cleaning a particularly grimy band; instead, lightly dampen the cloth with water.

3. Using a microfiber cloth, clean the surface. dry? wet? wet and a little soapy? Here, any of the three options will do, so consider the mess and select the appropriate one. If the job requires suds, use a very mild, hypoallergenic soap and make sure the cloth you’re using isn’t too wet or abrasive.(Also secure for use as a disinfectant are Clorox wipes and isopropyl alcohol.)

4. Apple suggests using a wipe containing 70% isopropyl alcohol, 75% ethyl alcohol, or Clorox Disinfecting Wipes for bands made of materials other than leather or fabric, such as Apple Watch bands, Solo Loop bands, Sport Bands, Nike Sport Bands, or any metal bands. Avoid using any products that contain bleach or hydrogen peroxide, and avoid immersing your band in any cleaning solution. Instead, clean the band with one of the wipes mentioned above or a damp, non-abrasive, lint-free cloth.

5. Before reinserting it onto your watch, dry the band.

How To Clean Your White Apple Watch Band

Your wrist now has some unsightly stains from that once-sleek white silicone or elastomer watch band. Unfortunately, the manufacturer’s instructions (assuming it’s an Apple brand wristband) call for using the same cleaning procedure as for the Apple watch sport bands. However, stains or yellow discoloration on a white watch band might be resistant to mild hand soap and water. The answer is a Mr. (though not one that Apple would approve of). Remove stains and discoloration with a Clean Magic Eraser, which can be used with a little water.

Read More About Apple Watch Problems:

How To Clean Your Apple Watch Face

In contrast to your Apple Watch band, Apple does not advise cleaning your Apple Watch with any soaps, household cleaners, abrasive materials, or external air and heat sources because these items can harm your device.

1. By holding down the side button while turning off, disconnect your Apple Watch from the charger, if one is present.

2. Remove any bands that you are wearing from your device if they are not water-resistant (this includes leather or stainless steel bands).

3. Use a non-abrasive, lint-free cloth to clean your Apple Watch. If it’s necessary to get rid of oily or sticky materials, lightly dampen the cloth with fresh water.

4. Without using any soap or other cleaning agents, you can also hold the watch under a warm, gently running faucet for 10 to 15 seconds.

5. Use your soft, lint-free cloth to dry your Apple Watch, making sure to dry the device’s back crystal as well.

how to clean apple watch band

How To Clean An Apple Watch Sport Band & Solo Loop

The sport band for the Apple Watch is one of the most well-liked bands. These are constructed of fluoroelastomer, a flexible material that resists many chemicals, including chlorine. Both the pool and the ocean are safe to use. However, if worn frequently or after exercising while wearing your Apple Watch while swimming, it needs to be cleaned.

One of the simplest bands to clean is this one. Apple does not advise it, but some users have reported success soaking the bands in warm, soapy water. However, you can use Clorox and a fresh, nonabrasive cloth to remove stains.

There is a non-Apple-approved trick that you can use to clean a white Apple Watch band and restore its new appearance. When you’re finished washing the band, scrub it down with a Magic Eraser. Do keep in mind that Apple will not issue a refund or replace the band if you damage it in this way.

How To Clean The Apple Watch’s Digital Crown

Check for debris around the Digital Crown and clean your device if it becomes stuck or won’t move on your Apple Watch.

Here is how to clean the Digital Crown if you find debris like dust or lotion:

1. Switch off your Apple Watch and remove it from the charger, if applicable.

2. Remove any leather or stainless steel bands you may be wearing from your device if they aren’t water-resistant.

3. For 10 to 15 seconds, hold the Digital Crown under a warm, running faucet of fresh water. Never use soap or any other cleaning supplies.

4. Turn and press the Digital Crown as water trickles past the space between the crown and the rest of the watch.

5. Using a soft, lint-free cloth, completely dry your watch.

How To Clean A Leather Apple Watch Band

Another ostensibly challenging material to observe is leather, but bear in mind that the bands of many antique watches are comparable. In contrast to other materials, leather needs routine maintenance to maintain its soft texture and high quality shine.

A leather Apple Watch band can deteriorate and become dirty over time if you wear it frequently. The leather can be easily cleaned with a cloth and soapy water. To avoid causing water damage, you must take care. Additionally, the leather must be allowed to air dry overnight.

Leave a Reply

Your email address will not be published.